FILM HOOK SPONGE BOTTLE HOLDER SUS

Spec/Size

Product Code	250898828600
Color	SILVER
Size	W21 x D8.5 x H6cm
Materials	STAINLESS STTEL,POLYCARBONATE,PVC,POLYURETHANE
Weight	0.17kg
Warranty	1 year
Assembly Type	Assembled
Assembly Time	-
Delivery Type	DropOffDelivery
Package Size	W6 x D8.6 x H25cm
Package Weight	0.17kg
Made In	CHINA

●Adjustable dividers
●Reusable adhesive sheet

【Size (approx.)】
21 x 8.5 x 6 cm

【Material】
Body: Stainless steel
Adhesive sheet/Hook: Polycarbonate
Sheet: Vinyl chloride resin/Polyurethane

【Load capacity (approx.)】
2 kg

【Heat resistance temperature】
60℃

【How to install】
*Before use, please check that the adhesive sheet is not deformed or creased.
1. Clean the mounting surface of any dirt, moisture, oil, etc., and let it dry.
2. Peel off the protective sheet from the adhesive side of the adhesive sheet.
3. Press the adhesive sheet firmly and rub it from the center outwards to remove air and ensure a tight fit.
4. Insert the main body into the hook from above. Wait at least 30 minutes after attaching the adhesive sheet before placing items to be stored.

【Installation direction】
When viewing the product from the side, install it with the protruding side facing the wall.

[About Installation Locations]
Places where it can be installed:
● Surfaces larger than the adhesive surface of this product
● Flat, glossy surfaces without bumps or irregularities (stainless steel, tiles, plastic surfaces, glass, metal painted surfaces such as refrigerators and washing machines, etc.)
*Avoid using on thin glass surfaces.
*Even on flat surfaces, installation may not be possible depending on the surface treatment, material, condition, and environment.

Places where it cannot be installed
: ● Surfaces smaller than the adhesive surface of this product
● Surfaces with bumps, rough surfaces, curved surfaces, or non-vertical surfaces
● Wallpaper and other cloth surfaces
● Surfaces with surface treatments such as fluorine coating, mold-resistant coating, or stain-resistant coating
● Earthen walls, plaster, sand walls, mortar, concrete, frosted glass, natural marble
● Near fire or in high-temperature areas

[Care Instructions and Precautions]
● If the adhesive strength of the adhesive sheet decreases, gently wash the adhesive surface with a diluted solution of neutral detergent, rinse with water, and allow to air dry to restore the adhesive strength.
● Do not peel off the adhesive sheet roughly or with excessive force, as this may deform the sheet and prevent repeated use.
● Do not boil the adhesive sheet or the main body. Also, do not use a dishwasher.
● Do not use thinner, benzene, polishing powder, abrasive detergents, scouring pads (nylon, metal, etc.), melamine sponges, or abrasive sponges.
● Do not use bleach.

[Handling Precautions]
● Do not use for purposes other than its intended use.
● Use on a flat surface.
● Make sure it is firmly attached before use.
● Store items in a balanced manner to prevent uneven weight distribution.
● Use within the weight capacity.
● Even within the weight capacity, the product may fall due to a strong impact, causing injury or damage, so please be careful.
● The weight capacity is an estimate. It varies depending on the material of the surface on which it is installed and the usage conditions.
● Do not use near fire, in high-temperature areas, or in direct sunlight.
● If left in the same place for a long period of time, the installation surface may discolor. Remove it periodically.
● When using, be careful not to injure yourself on metal joints, etc.